Introduction
Hydrocarbons(oil and gas) are found in the pore spaces of sedimentary geologic formations (reservoir rocks). Once an oil or gas reservoir is discovered and assessed, production engineers begin the task of maximizing the amount of oil or gas that can ultimately be recovered from it. Some reservoir rocks may allow the oil and gas to move freely, making it easier to recover. Other reservoirs do not part with the oil and gas easily and require special technique to move the oil or gas from the pore spaces in the reservoir rock to a producing well. Even with today’s technology, in some reservoirs more than two-thirds of the oil in the reservoir may not be recoverable.
Optimum production of oil from an oil reservoir is the main objective or target of the operators of an oil well in order to meet up with the growing demands of the crude oil. The efficient production of fluids from a reservoir depends on the maintenance of the pressure draw down between the reservoir and the well bore which is the driving force or energy that forces the reservoir fluid (oil) from the reservoir into the wellbore.
NOT THE TOPIC YOU ARE LOOKING FOR?
Once payment is made, kindly send us your project topic, email address and payment name to +234 810 144 4147
Once payment is confirmed, Project materials will be sent to your email
The Warri South West is a region built up by the sedimentation of the Niger Delta and consists of the delta in various stages of development. Four major physiographic units are identifiable with in it. First, the freshwater swamp which is the most ac...
Well tests exist already for a long time. Since the first oil reservoir was discovered, oil companies have always been keen on estimating reservoir properties such as size. Present day well testing has gone beyond this and its usefulness cannot be ov...
emperature. It is usually obtained from reservoir fluid analysis. Reservoir fluid sampling and analysis is often expensive and time consuming operation that cannot be carried out whenever the volumetric properties of reservoir fluids are needed. Henc...
n Nigeria, it is common among motor mechanics to dispose waste oils into gutters, water drains and soil (Okonokhua et al., 2007). Waste oils is defined as used lubricating oils obtained after servicing and subsequently draining from automobile and g...
Every Natural gas well ceases producing as reservoir pressure depletes. The usual liquid presence in the reservoir can cause further problems by accumulating in the wellbore and reducing production even more. There are a number of options in well com...
he world is in a state of increasing energy demand accompanied by decreasing availability of conventional energy sources, the bulk of these energy sources being fossil fuel. The cost of fossil fuel, inclusive of cost of procurement, processing and ut...
espite best of efforts made to avoid problems, numerous challenges still plaque product distribution and marketing such as transportation difficulties in moving products safely and quickly to point of need occasioned by deplorable road conditions and...
A poor description of the reservoir characteristics usually poses a unique problem in exploration and production there by leading to poor development and management of a reservoir field to yield optimum profit required. An accurate description is ...
t is important to accurately predict the pressure drop accross a production system. This has been a difficult task in the oil and gas industry as the production system in real life is not homogenous (single phase) as assumed in most theories. The rea...
Definition of terms Local Content:Is the development of local skills, oil and gas technology transfer, and use of local manpower and local manufacturing. For a more practical definition, one could say that local content is building a workforce tha...
Message Us on WhatsApp »
